TZ MAPS are compatible with all NavNet TZtouchXL. TZ MAPS are NOT compatible with TZtouch3 and below. TZtouch3 and below remain compatible with MM3D charts.

The price of a TZ MAPS area remains the same as the price of a wide MM3D area, example, $250 in the USA. Coverage is similar to that of a wide MM3D area. Although the price remains the same, TZ MAPS come with a lot of added benefits: - Raster and Vector charts are “combined” with TZ MAPS (no need to make two purchases as you would have to with MM3D). - TZ MAPS includes High Resolution Bathymetric Data (BathyVision) which is used to render dynamic bathy contour charts along with high-resolution depth shading (fishing charts). - TZ MAPS includes one Year of updates (subscription required to extend updates after the 1st year). - AI Routing. TZ MAPS is required for auto routing on TZtouchXL. - Risk Visualizer* and AI Avoidance Route*. These features require TZ MAPS. * Also requires a DRS NXT Radar

After the 1-year free update that comes with every TZ MAPS initial purchase, customers that want to keep their chart updated will need to subscribe directly from their MFD. Because this is a subscription that requires the customer’s credit card, it will not be possible for the dealer to sell updates. Note: If the subscription is not possible, dealers can purchase the chart again ($250) which would extend the update period for another year (but this would be much less cost effective than the subscription program).

You will be required to subscribe to keep your TZ MAPS updated after the first year. The price of the subscription varies per area (For example, in North and Central America, the renewal is from $19.99 to $30.99).

No, it is not a requirement for you to subscribe after one year. Customers that decide not to subscribe will no longer be able to update their charts, but they will still be able to view their existing installed charts.

Customers that do not immediately subscribe after the one-year free update will not be penalized if they decide to wait and start a subscription later. They will pay the regular subscription price once they decide to have access to the new update.

When you purchase a TZ MAPS chart on the TZtouchXL MFD and log in that MFD to a My TIMEZERO account, it will unlock the same chart/s for one year on TZ iBoat (you must log into the same account on TZ iBoat). After one year, if you want to keep both charts updated, you only need to subscribe to the area once (either from TZ iBoat via the WebStore or from your TZtouchXL MFD). Subscriptions to a chart area are tied to the My TIMEZERO account and will benefit all devices that are using that account provided that the chart has been purchased once on the TZtouchXL MFD.

No. However, you must link your TZtouchXL System ID with your TZ Pro or TZ Navigator System ID. Once you link your TZ Navigator or TZ Pro system ID to a TZtouchXL system ID the charts that were purchased for the TZtouchXL will be available for TZ Navigator or TZ Professional. Contact your Furuno National Distributor and/or their authorized dealer network to link the System IDs.

Yes. OneNavNet TZtouchXL or one TZtouch3/TZT2BB MFD needs to be set as a chart master for chart sharing. Just like TZtouch and TZtouch2/3, NavNet TZtouchXL is a “master-less” system regarding network and settings configuration, making the system fully redundant. However, one TZtouch MFD must be set as the “chart master” so the MFD can share its system ID over the network. See section 9 for more info on chart master.

Outside of North America The 512GB micro SD-card included with each NavNet TZtouchXL contains a TZ MAPS world chart and the following TZ MAPS charts. Japan, Western and Eastern Mediterranean, Iceland, Greenland, Norway, Baltic Sea, Skagerrak & Kattegat, UK, Ireland & the Channel, Europe North and Noth- West, Australia, New Zealand, Chile, French Polynesia & New Caledonia. Customers wishing to access additional satellite photo areas or charts will need to download additional files to their system. Locked TZ MAPS chart areas can be purchased and unlocked directly from the MFD by connecting the NavNet TZtouchXL to the Internet.

No. TZT10, 13, and 16X come with a built in GPS while the TZT22X and the TZT24X do not. We recommend the SCX20 satellite compass for both position and heading information or the GP330B for position only information.

Yes, polarized glasses are compatible with all NavNet TZtouchXL.

We recommend the Furuno HUB101* or the new waterproof HUB102. However most commercially available 100 Mbps or Gigabit Ethernet Hub/Switches are compatible. See section 8 for optional available NavNet TZtouchXL and HUB102 cables. *If you are reusing an older HUB101, make sure that the PCB board is a version -55 or higher.

Yes. TZT16X, 22X, and 24X MFDs can use standard widescreen touch type PC monitors that are HDMI compatible. Non-touch screen monitors are also compatible. It is recommended that monitors be tested for compatibility with the NavNet TZtouchXL before the monitor is installed. TZtouchXL MFDs support dual point touch only. Any touch monitor that requires a driver to be loaded into the NavNet TZtouchXL will not work. The NavNet TZtouchXL can use widescreen PC monitors that are either HDMI or DVI compatible (with an adapter plug). Non-marine monitors are not recommended for outside installations or in high bright areas. Also consider nighttime viewing for installations using non-marine grade monitors. Furuno offers the MU245T wide screen touch monitor. Note: Connected touch monitors must have the same native resolution as the NavNet TZtouchXL they are connected to as well as have HPD (Hot Plug Detection) functionality. TZT10X and 13X do not have and HDMI output port.

NavNet TZtouchXL MFDs cannot be mixed with a TZTL12F or TZTL15F MFD. NavNet TZtouchXL MFDs may be mixed with TZtouch3 MFDs and the TZT2BB in a single network. There are some limitations with a mixed system. NavNet TZtouchXL MFDs will support many new HTML5 3rd party applications that a TZtouch3 MFD or a TZT2BB will not.

Version 3.7 or above for TZtouch3 MFDs and v9.7 or above for TZT2BBs.

No.NavNet TZtouchXL are not compatible with NavNet 3D or the original TZtouch. NavNet 3D or TZtouch and NavNet TZtouchXL cannot exist together on the same network.

Yes. NavNet TZtouchXL can be connected to a FAR2XX7, FAR2XX8, FR15X8, and FR15X3, depending on radar software versions. Please contact Furuno Tech support for additional information.

NavNet TZtouchXL are compatible with SiriusXM audio, SiriusXM weather and SiriusXM fish mapping via the BBWX4 SiriusXM weather receiver. (SiriusXM radio is only available for North America).

Yes. TZtouchXL MFDs are compatible with TZ Professional and TZ Navigator. On a TZT16X, 22X and 24X you can also utilize the TZtouchXL HDMI IN port along with the USB passthrough port to display and control a PC running TZ software. HDMI Cable part # 001-656-600-00 USB Passthrough OTG cable part # 001-646-940-00 Please contact MaxSea in Europe or TZ (TimeZero™) in North America for additional information concerning compatible MaxSea/TZ (Time Zero™) software versions. Just like TZtouch2/3, TZTXL MFDs are part of the Furuno/TZ Pro/TZ iBoat ecosystem. This ecosystem allows various types of user data, such as routes, waypoints, pictures, catches, etc., to be shared among the different platforms.

Yes. NavNet TZtouchXL are compatible with CZone. Please see the “Guides” section of the NavNet TZtouchXL product page for more information.

Yes. NavNet TZtouchXL can be connected to a Fusion radio via Ethernet or NMEA2000 depending on the Fusion radio model.

The MCU002, MCU004, TEU-001 USB remote controllers, MCU005 Ethernet controller, and MCU006/H NMEA2000 (new for 2023) controllers are compatible with the NavNet TZtouchXL. The MCU004/5/or 6 can control each NavNet TZtouchXL or TZtouch3 MFD in a network. More than one MCU002/4/5/6 can be connected to a single NavNet TZtouchXL or in a system. Once connected to an MFD any MCU004/5/or 6 can control any NavNet TZtouchXL or TZtouch3 MFD in the system. MCU002 and TEU001 remote controllers only control the TZtouch3 MFD, TZT2BB (one side) or NavNet TZtouchXL MFD that they are physically connected to. The TZT2BB is not compatible with the MCU006/H remote controllers.

Yes. NavNet TZtouchXL MFDs have a powered 5V USB port that can supply up to 0.9 Amps to any generic USB Hub. This will allow you to connect additional USB devices, such as the MCU002, MCU004, and TEU001 USB remotes, USB memory stick, mouse, keyboard, etc. If you need to extend the USB cable, make sure to use amplification. Please contact Tech support for additional information.

Yes, NavNet TZtouchXL are compatible with most generic USB mice, pointing devices, or keyboards if a special driver is not required. You cannot load any drivers into a NavNet TZtouchXL. You can perform almost every function using a mouse trackball and wheel. The only function that is not supported is pan and tilt while the plotter is in 3D mode which is only supported by the two- finger touch operation.

Any NavNet DRS radar sensor is compatible with NavNet TZtouchXL MFD except for the DRS4W Wi-Fi radar sensor. Older NN3D DRS radar sensors require software version 1.16 or higher and a dedicated power supply. Please contact technical support for more information.

These incredible new safety features require the use of DRS NXT solid state radar series.

You can access and control any compatible networked black box fish finder or the internal fish finder of any NavNet TZtouch3, NavNet TZtouchXL 10", 13", 16", or TZT2BB from the NavNet TZtouchXL. The following Furuno black box and internal fish finders are compatible, BBDS1, DFF1, DFF1-UHD, DFF3, DFF3-UHD, the internal fish finder of a NavNet TZtouch3, TZT10X, 13X, 16X, or TZT2BB. Note: older black box fish finders are not compatible.

A maximum of two active/selected fish finder sources, one CHIRP side-scan, and one DFF-3D multibeam sonar are allowed on one NavNet TZtouchXL network. The CHIRP side-scan and the DFF-3D multibeam sonar are not counted as fish finders.

A maximum of two active/selected fish finder sources, one CHIRP side-scan, and one DFF-3D multibeam sonar are allowed on one NavNet TZtouchXL network. The CHIRP side-scan and the DFF-3D multibeam sonar are not counted as fish finders.

230 Khz or 455 khz. Transducer dependent.

Yes.

Yes, NavNet TZtouchXL MFDs are compatible with most Axis IP cameras, IRIS IP cameras, Hatteland cameras, and others. Check the product page for the NavNet TZtouchXL or contact Tech support for specific compatibility information.

NavNet TZtouchXL MFDs have one (1) Analog input*. You can network up to four (8) IP cameras and two (2) Axis Quad Video servers. One FLIR camera input. One H.264 streaming input. Additionally, TZT16XL, 22XL, and 24XL MFDs have one (1) HDMI IN port. The HDMI IN port along with the USB pass-thru port can be used to display and control other devices such as a PC. Supported HDMI inputs: • FHD (1920x1080) • HD (1280x720) • SXGA (1280x1024) • XGA (1024x768) * Analog video input requires the optional multi-cable part # 00164702000

The same applications that are available for TZtouch2/3 are compatible with NavNet TZtouchXL. Such as the NavNet Controller, NavNet Viewer, NavNet Remote, TZ First Mate, and TZ iBoat.

Yes. NavNet TZtouchXL is part of a complete Furuno/TZ ecosystem that offers a way to save and load user information such as waypoints, marks, routes, pictures, etc., to and from the cloud.

Yes, NavNet TZtouchXL mount easily using a front mounting system. Two MFDs can fit side by side without a gap between the MFDs.

NavNet TZtouchXL are mounted from the front and are supplied with standard flush mounting accessories for all models. TZT10X and TZT13X are also standard supplied with a tabletop bracket. An optional tabletop bracket is available for the TZT16X, part # 00166094000. Note: Optional brackets are not available for the TZT22/24X.

Ethernet waterproof to waterproof (for use with HUB102) : 001-653-250-00 2m; 001-653-260-00 5 m: 001-653-270-00 10 m; WRJ-ADP-05M 5 m waterproof to field attachable RJ-45 connector. Ethernet waterproof to non-waterproof: 001-646-960-00 2 m; 001-646-980-00 5 m; 001-547-000-00 10 m; USB cables: 001-647-040-00 5m Type A to Type B waterproof to non-waterproof.; 001-646-920-00 .3m extension. Type A to Type B waterproof to non-waterproof; 001-646-940-00 .3m conversion. M8 to USB micro–B USB OTG HDMI: 001-656-600-00 5 m waterproof to non-waterproof. Multi-cable: 001-647-020-00 1 m multi-cable (use for analog video in, NMEA0183 out, etc.)